Golden Scissors

Tooling manufacturers warmly remind that how to carry out fashion matching should be a problem for every office worker, because they have to wear this way to work every day, and they are in a hurry, so they can’t waste hesitant time, so the following tooling manufacturers will introduce to you.

1. The bright red padded jacket has a loose design style and a drawstring design at the waist, showing charming slender lines and bright colors, bringing a super eye-catching effect.

2. The warm military coat has an extraordinary three-dimensional texture, loose fit, no sense of restraint, exquisite three-dimensional patch pocket design, full of coolness, and relaxed street casual style.

3. The solid-color overcoat makes the clothes show very three-dimensional lines, the simple and three-dimensional belt design makes the lines clearer, and the elegant and simple long style makes the figure taller.

4. Red waist dress jacket with plush lapel to keep warm and fashionable. The color is bright and exudes a strong youthful and sweet atmosphere. The drawstring design at the waist creates a slender line, which is very slim and slim.

5. Loose cotton coat, slim fit, neutral color, simple and loose version, without sense of restraint, showing a very relaxed street color, exquisite three-dimensional patch pocket design, full of cool feeling, fur embellishment.

Today's popular dress coats are the ones that were often worn in the past. After improvements and decorations, they have become the current dress coats. For example, look at whether the winter dress coat is slim and matching, and it will not look fat in many places. Since they are so important, how to clean them? The following tooling manufacturers will continue to introduce you.

1. Tooling should be cleaned in different areas according to the cleanliness level or workshop it belongs to, or it should be cleaned in batches, and the amount of laundry each time should not exceed 2/3 of the amount of laundry. For some dirty tools, the laundryman is using a washing machine It needs to be rubbed by hand before washing. Put the dirty work clothes into the washing machine, add an appropriate amount of washing powder, cover the washing machine cover, turn on the power, turn on the faucet switch, start the machine, set the program, and then start to execute. According to the tooling manufacturer, after the initial dehydration is filled up, open the top cover of the washing machine, add 1 bottle (500ml) of laundry detergent, continue to rinse twice, and then spin dry. Unplug the power plug after use, turn off the tap water, and hang the drain hose on the hook on the side of the washing machine. After the clothes are dry, be sure to send them to the drying room to dry, fold them neatly, and repair any damage (the same cloth should be used to repair). According to the introduction of the tooling manufacturer, the tools in the general area and the 100,000-level area are packed in different clean plastic bags according to the department and number, and sent back to the corresponding areas of each department for storage in time. The 10,000-level tooling needs to be sterilized according to regulations before it can be used. Shoes are washed and dried in the downstairs hall. Work shoes are soaked in washing powder for 30 minutes according to their cleanliness. People brush them inside and out, and then wash them with water.

2. Cleaning cycle and storage location. The tool manufacturer told us that the general work clothes in this area include white coats and dark work clothes. The laundry room and laundry room are located in the lobby downstairs. Generally, the tooling in this place is changed once a week. Everyone puts the dirty tooling in the designated place after five shifts a week. If others use less products, it will be cleaner, and the cleaning interval can be extended appropriately.

The above is the introduction of the tooling manufacturer, I hope it will be helpful to you.